MTB-CUT 180T

How to cut back full

When cutting full-screen back films, please disable the "Cut Center" option on the cutting page. Additionally, ensure that the material size is set to 180mm x 120mm. Since the ful...

Nov 22, 2025

MTB-CUT 180T

What‘s material size width and height

"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...

Nov 22, 2025

MTB-CUT 180T

What should I do if the carriage moves to the right automatically?

This issue is usually caused by a faulty motherboard controlling the carriage. It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...

MTB-CUT 180T

Mobile back skin full problem

"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page. This is because full-wrap back films have larger dimensions, so you can either use...

Nov 22, 2025

MTB-CUT 180T

What's the right back skin cutting methods

"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...

Nov 22, 2025

MTB-CUT 180T

How to cut back film

"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...

Nov 22, 2025

MTB-CUT 180T

Why the full cutting is not support

This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...

MTB-CUT 180T

What is a Full Back film?

A Full Back template refers to a full-wrap back film that covers: The back of the phone The side edges The curved corners around the device Compared with normal back films,...

MTB-CUT 180T

What to do if machine is not cutting paper full

"This issue is usually caused by the template being too large. Try to disable the “Cut Center” option in the cutting page. https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...

Nov 22, 2025

MTB-CUT 180T

Why does it throw some slices out halfway?

This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...

MTB-CUT 180T

what to do if full back cutting is not working?

This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...

MTB-CUT 180T

Machine cuts only the camera area and then the material exits the machine — what should I do?

This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...

MTB-CUT 180T

If machine cuts only camera how to solve it

This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...

MTB-CUT 180T

What is the use of the “Cut Center” option?

The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...

MTB-CUT 180T

Machine cuts only the camera area and then the skin comes out of the machine

This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled. Solution When cutting full back films, please disable the &l...