For most cutting tasks, we recommend using the machine’s default settings: 👉 Cutting Speed: 200 👉 Blade Pressure: 300 These settings are suitable for the majority of scr...
Our screen protector cutting machine provides five built-in pressure preset slots. You can rename these presets and save the pressure settings for your commonly used cutting mater...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
"The recommended cutting parameters for UV materials on the screen protector cutting machine are: Blade holder scale: 6, Cutting pressure: 380. If the machine cannot cut properl...
This issue is usually caused by a faulty motherboard controlling the carriage. It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts However, this is only a recommended value. The actual blade lifespan may increase or decre...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"Prolonged use of excessively high blade holder settings and cutting pressure may lead to a decline in the precision of the blade holder, resulting in the inability to properly cut...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues. Please follow the instruction vid...
This issue is usually caused by incorrect language settings or app data problems, resulting in the product page not displaying properly. Please follow the instruction video to cle...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
"To restore the machine settings, follow these steps: Restart the device As the machine is starting up, quickly tap the blue icon 10 times Select "Factory Reset" Please no...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
