The download time for data updates depends on: The connection speed between the cutting machine and the server The amount of data being updated In fact, as long as your mach...
The material size setting depends on the actual material you are using. By default, the machine is set to: 180 mm (width) × 120 mm (height) Please pay attention to the o...
The Gear Ratio controls the relationship between motor movement and the actual cutting distance. It is a key parameter that directly affects cutting accuracy and scaling. The defa...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
The correct material (paper) size setting is: 180 mm × 120 mm Please make sure the material is placed in the correct direction before cutting.
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
If the film is being damaged during cutting, the Blade Holder Scale may be set too high. Please try reducing the Blade Holder Scale. 👉 Recommended Blade Holder Scale: 5 Under n...
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
If the machine is not showing phone models, this is usually caused by an incorrect language setting or an incomplete language/data package. You can follow the detailed steps in th...
If the sensor is not working, please follow these steps: 1. Check Auto-loading setting Go to Settings and check if the “Auto-loading” option is disabled. If it is disabled, plea...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film. If the...
"The recommended cutting parameters for UV materials on the screen protector cutting machine are: Blade holder scale: 6, Cutting pressure: 380. If the machine cannot cut properl...
"The settings button is only available when the device is logged in. You can log in to your account again to find this button. If, for some reason, you cannot log in successfull...
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting. Please check the following: Ensure all rollers are positioned...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
This issue is usually caused by the Blade Holder scale being set too high. Please try to reduce the Blade Holder scale setting. Important Note Pay attention to the blade exposur...
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data. S...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
