If you discover a size cutting problem during cutting, please send us the following information: The phone’s System Information page The corresponding cutting template/mode...
For the Mietubl MTB-CUT 180T screen protector cutting machine, the maximum supported cutting size is: 16 inches
"Solution: Mietubl’s screen protector cutting machines come with a built-in data editing function, which allows you to modify and resize existing templates according to your requir...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
If you mean creating a new custom template, you can use our built-in Custom Template function. This feature allows you to enter your own width, height, corner radius, and other pa...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
We provide a variety of cutting materials such as HD clear, matte, privacy, and anti-blue-ray films. Prices vary depending on the material and functionality, but all options are ge...
"The continuous running of the motor may be caused by the following reasons: Poor motor wiring connection: Check if the motor wiring is secure. If there is any looseness or poor co...
This issue is usually caused by the Blade Holder scale being set too high. Please try to reduce the Blade Holder scale setting. Important Note Pay attention to the blade exposur...
This issue may be caused by: The material sensor being blocked A mainboard malfunction Please try the following steps: Go to Settings Disable the “Auto Loading&rdq...
For most cutting tasks, we recommend using the machine’s default settings: 👉 Cutting Speed: 200 👉 Blade Pressure: 300 These settings are suitable for the majority of scr...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material. If the cutting...
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position. Important reminders: After adjustm...
Yes, the machine supports simple modifications to existing templates, such as expanding or reducing the size or opening holes.
Phone case stickers are usually smaller than standard back film sizes. To avoid user confusion, this size is currently not supported by the machine.
