Showing 80 results
for
"home app"
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T
"You can set the Cutter APP as the Home App in the system settings.
Once this is set, the machine will automatically launch the Cutter App every time it’s powered on.
https://mi...
MTB-CUT 180T
This happens because the APP version was rolled back during the factory reset.
When the machine is reset, the system returns to the earliest APP version, and many new models added...
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T
This issue is usually caused by app cache or data errors, preventing the app from running properly.
Please follow the instruction video to clear the app cache and data, then reope...
MTB-CUT 180T
"You can reinstall the Cutter App by following these steps:
Open Browser
On the smart screen protector cutting machine, run the Chrome browser and enter the following address:
ht...
MTB-CUT 180T
"Cache is essential for ensuring the stable operation of the app. However, under certain circumstances — such as after an app update or when data models fail to load — clearing the...
MTB-CUT 180T
"We periodically release updates for the machine's app to improve performance and functionality.
The password required to perform the app upgrade is ""1212"".
Please note:
App...
MTB-CUT 180T
No, the machine uses a blade to cut, which makes it safe, quiet, and pollution-free ideal for use in locations like shopping malls or at home.
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
"You can change your password in two ways:
Change directly on the machine – Go to Home → My → Change Password, enter your current password, and set a new one.
Request technical...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
"On the home page, click the “Forget password” option and enter the email address you used during registration to reset your password.
https://osscdn.mietubl.com/images/20250813172...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
You can access your machine’s cutting activity from the Cutting Records section on the home page.
There, you will find the daily and 30-day cutting statistics.
If you req...
Showing 1
to 20
of 80 results
