Showing 56 results
for
"replace roller assembly"
MTB-CUT 180T
"The rollers are primarily responsible for controlling the forward and backward movement of the material.
Please note: Pay close attention to the position of the black pads on the...
MTB-CUT M188
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material.
If the cutting...
MTB-CUT 180T
"If the tablet screen protector is not cutting well, it is usually because the roller is not providing enough pressure. You can try the following solutions:
Lift the gear at the ba...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
"The following is a video of replacing the roller of the MTB-CUT 180T intelligent film cutting machine.
https://osscdn.mietubl.com/video/202508132101.mp4"
MTB-CUT 180T
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position.
Important reminders:
After adjustm...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
"The machine features an independent housing design.
In the event of housing damage, you can replace the machine’s outer shell separately without needing to replace the entire unit...
MTB-CUT 180T
"In most cases, templates are designed with precise and regular shapes.
If the shapes are not forming properly, it may be caused by:
A loose cutting carriage – Please check if t...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
MTB-CUT 180T
"If you experience unresponsive touch or system crashes, it may be necessary to replace the machine’s screen.
This video provides a step-by-step guide on how to replace the screen...
MTB-CUT 180T
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life.
However, after prolonged use, the surface of the mat strip...
MTB-CUT 180T
"The intelligent film cutting machine has two belts:
One is used to control the left-right movement of the carriage
https://osscdn.mietubl.com/images/X-axis-belt.jpg
The othe...
MTB-CUT 180T
"Our smart screen protector cutting machine has no cutting limit, and we will continue to provide template and data updates to ensure long-term usability.
However, please note that...
MTB-CUT 180T
"When replacing the blade, simply press the top of the blade holder to remove the old blade and insert a new one.
Please refer to the video below for detailed instructions on how t...
MTB-CUT 180T
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car.
If the X-axis belt...
MTB-CUT 180T
"The auto-loading sensor is essential for enabling the machine to automatically load cutting materials.
This sensor can be toggled on or off through the cutting interface.
If the...
MTB-CUT 180T
"If you are unable to start the machine and the power switch does not light up when pressed, it is likely that the switch is malfunctioning.
This video provides a step-by-step guid...
MTB-CUT M288
"The MTB-CUT M288 intelligent film cutting and pasting machine uses a modular screen design for easy maintenance and replacement.
If necessary, you can simply remove the screen and...
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine fails to automatically secure the screen protector or if the vacuum pump does not start, it may indicate a vacuum...
Showing 1
to 20
of 56 results
