Showing 54 results
for
"version test password"
MTB-CUT 180T
"The version test password feature is intended only for limited testing before a new version is officially released.
It does not always take effect, and the default password is usu...
MTB-CUT 180T
To connect an Epson printer, you need to update the machine APP first.
Steps
Go to:
Mine → APP Version Update → Test Version → Enter the update password: 202...
MTB-CUT 180T
"You can change your password in two ways:
Change directly on the machine – Go to Home → My → Change Password, enter your current password, and set a new one.
Request technical...
MTB-CUT 180T
"On the home page, click the “Forget password” option and enter the email address you used during registration to reset your password.
https://osscdn.mietubl.com/images/20250813172...
MTB-CUT 180T
"The machine’s software version depends on the release of new features.
As of October 2025, the latest APP version is 3.0.05.
Tips:
You can check or update your version by foll...
MTB-CUT 180T
"On the login page, click “Forget password” and enter your email address to receive a verification code for resetting your password (see the example image below).
https://osscdn.mi...
MTB-CUT 180T
How to connect the screen protector machine to a Canon / Epson printer?
Please follow these steps:
Go to: “Mine” → “APP version update” → &ldquo...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
"The Word Cutting feature is only available in version 3.0.03 and above.
You can check your current app version by going to "About This Device".
https://osscdn.mietubl.com/ima...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
MTB-CUT 180T
"The timing of version updates depends on the release of new features and does not follow a fixed schedule.
You can go to ""My"" → ""APP Version Update"" to check whether your curr...
MTB-CUT 180T
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".If your version is lower than 3.0.03, please go...
MTB-CUT 180T
This happens because the APP version was rolled back during the factory reset.
When the machine is reset, the system returns to the earliest APP version, and many new models added...
MTB-CUT 180T
As of March 2026, the latest APP version is 3.0.05.
You can go to: “Mine” → “APP version update” to check and update to the latest version.
If you...
MTB-CUT 180T
The password for software/firmware upgrade is: 1212
MTB-CUT 180T Pro
The Upgrade Code is mainly used for internal testing purposes. Usually are unstable version
Under normal circumstances, if you want to update your device, you only need to: C...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
Showing 1
to 20
of 54 results
