If the MTB-CUT M288 triggers an alarm during the installation process—especially when installing on iPhone models—please don't worry. This happens because the silicone...
"PrinterServer is mainly used to connect the smart screen protector cutting machine with a printer to enable personalized pattern printing and customization. You can follow the ste...
"The silicone pad is one of the few parts in the MTB-CUT M288 intelligent film cutting and pasting machine that requires replacement. It is essential for the proper installation of...
"The silicone pad is one of the few parts in the MTB-CUT M288 intelligent film cutting and pasting machine that requires replacement. It is essential for the proper installation of...
You can follow the video tutorial provided below to operate the MTB-CUT M288 intelligent cutting and pasting machine. The video demonstrates all the required steps for proper cutt...
MTB-CUT 180T Screen Protector Cutting Machine does not include UV curing function. If you need to perform UV curing operations, you will need to use a separate UV curing device, s...
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by: Loose or Damaged Screen Cable Op...
Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons: Insufficient power supply – Please verif...
"White edges when applying film with the MTB-CUT M288 may be caused by the following reasons: Firmware issue – Please ensure your firmware version is V25.0431. https://osscdn.mi...
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard. This issue is typically caused by a loose or faulty screen-to...
"Error 1002 indicates a serial communication error within the machine. If you encounter this issue, please try the following steps: Reconnect to Wi-Fi and restart the device...
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
"You can report an issue in the following ways: Use the search bar in the current window to type in keywords related to your issue and see if there’s already a solution available....
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
"This can be caused by several issues: - Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power. - Blade Pressu...
"English Version If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons: Template too large It’s re...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"If the 180T screen protector cutting machine displays a “Reconnection” message after startup, it is likely that there is an issue with the system firmware. You can resolve this by...
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
