Showing 105 results
for
"back film"
MTB-CUT 180T
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials:
Material | Back Film | Four Layer Soft Film | Explosion-...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
The intelligent film cutting machine uses hydrogel screen protectors, typically made of TPU/PET material. These can include high-definition, privacy, explosion-proof, matte, and an...
MTB-CUT 180T
"When the film bulges during cutting, it is usually caused by the following reasons:
Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page.
Additionally, ensure that the material size is set to 180mm x 120mm.
Since the ful...
MTB-CUT 180T
"A knocking sound from the machine can be caused by the following reasons and can be resolved as follows:
Transport screws not removed (for new machines)
New machines are shippe...
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
This issue is usually caused by the fixing screws at the back of the machine that secure the carriage during shipping not being removed.
Please check if the fixing screws at the b...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
You can find the machine’s serial number from two locations:
1. On the back of the machine
There is a physical sticker on the back of the screen protector machine that cont...
MTB-CUT 180T
Our screen protector machine offers several advantages:
1. No cutting limit no need to pay for each cut.
2. Double motors for stronger cutting power.
3. Adjustable cutting pressure...
MTB-CUT 180T
"The Word Cutting feature is only available in version 3.0.03 and above.
You can check your current app version by going to "About This Device".
https://osscdn.mietubl.com/ima...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
Showing 21
to 40
of 105 results
