MTB-CUT 180T

What to do if cutting not starting

"If the cutting process cannot start, please follow these steps to troubleshoot: Restart the machine: Power off and then restart the device. Check carriage reset: When the machi...

Nov 22, 2025

MTB-CUT 180T

How to make a perfect circle cut?

If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle. Please follo...

MTB-CUT 180T

The machine is making a continuous beeping sound and won't feed the material. What should I do

"If the machine is continuously beeping and not working properly, please try the following steps: Force Restart: Press and hold the power button for 20 seconds to force the machine...

Nov 22, 2025

MTB-CUT 180T

What is Center Cutting?

Center Cutting is a function that positions the cutting area exactly in the center of the material. The cutting position is calculated based on the width and height values you ent...

MTB-CUT 180T

How to adjust the cutting location?

You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function. Here’s how it works: When “Cut Center” is...

MTB-CUT 180T

Laptop screen guard is not cutting properly. What should I do?

Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...

MTB-CUT 180T

The machine shows “Exceeds the maximum width supported by the device.” What should I do?

There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...

MTB-CUT M288

The machine shows “Exceeds the maximum width supported by the device.” What should I do

There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...

MTB-CUT 180T

iPad cutting is inaccurate at the final stage — how to fix it?

Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...

MTB-CUT 180T

Machine cuts only the camera area and then the material exits the machine — what should I do?

This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...

MTB-CUT 180T

If machine cuts only camera how to solve it

This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...