Showing 244 results
for
"cutting holder"
MTB-CUT 180T
"Cutting misalignment is usually caused by:
Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
MTB-CUT 180T
When you say “wrong cutting”, we need more specific information to provide the correct solution.
Please confirm whether you selected the correct phone model/template...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
MTB-CUT 180T
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions:
Use X/Y Axis Mirro...
MTB-CUT 180T
We not only provide the screen protector cutting machines, but also offer various types of cutting materials with different functions and sizes.
You can purchase the cutting films...
MTB-CUT 180T
Unlike laser cutting machines, our screen protector cutting machine uses physical cutting, which is safe, noise-free, and pollution-free.
MTB-CUT 180T
In most cases, you can keep the cutting speed at the default value of 200.
This setting works well for the majority of materials.
When to reduce the speed
You should lower the...
MTB-CUT 180T
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting.
Please follow these steps:
Refer to the instruction video and re...
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
"The default cutting speed of the machine is 200. In most cases, keeping the default setting will deliver good cutting performance.
You only need to reduce the speed in special sit...
MTB-CUT 180T
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car.
If the X-axis belt...
MTB-CUT M188
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
MTB-CUT M188
This video provides a step-by-step guide on how to replace the cutting module spring of the MTB-CUT M188 screen protector cutting machine to resolve the issue of the cutting module...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function.
You can check the cutting and sales statistics by going...
MTB-CUT 180T
Our screen protector machine offers several advantages:
1. No cutting limit no need to pay for each cut.
2. Double motors for stronger cutting power.
3. Adjustable cutting pressure...
MTB-CUT 180T
If you are using standard back film, please follow these steps:
Set the material size in settings according to your actual material (e.g., 180 × 120 mm)
Enable the &ldquo...
Showing 41
to 60
of 244 results
