Our machines use a cloud-based database + local cache system. As long as your device is connected to the internet, it will automatically synchronize with the server and receive th...
Yes, the screen protector machine can cut PET material. However, you may need to adjust the machine settings, and keep in mind that PET material is more likely to wear out the cutt...
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials: Material | Back Film | Four Layer Soft Film | Explosion-...
Error 1002 indicates that a device port is occupied. In this case, you can try the following steps: Restart the device and go to "My" → "About This Device" to check if the QR co...
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film. If the...
"The recommended cutting parameters for UV materials on the screen protector cutting machine are: Blade holder scale: 6, Cutting pressure: 380. If the machine cannot cut properl...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
"I believe you mean you want to completely reset the device. If you want to restore the device to factory settings, you can follow the steps shown in the video below. However,...
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps: Restart the machi...
"The continuous running of the motor may be caused by the following reasons: Poor motor wiring connection: Check if the motor wiring is secure. If there is any looseness or poor co...
"You can reinstall the Cutter App by following these steps: Open Browser On the smart screen protector cutting machine, run the Chrome browser and enter the following address: ht...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
" Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app. All operations — including model selection, data updates, and de...
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app. All operations — including model selection, data updates, and...
"Prolonged use of excessively high blade holder settings and cutting pressure may lead to a decline in the precision of the blade holder, resulting in the inability to properly cut...
"By accessing the error information interface, we can quickly determine whether the device is functioning properly. You can send the error details to our technical team to help the...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
