Showing 117 results
for
"update steps"
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer.
Steps
1.Downl...
MTB-CUT 180T
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle.
Please follo...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
"If you want to change the language, follow these steps:
Change the language inside the Cutter App
Open Cutter App.
Go to the Settings menu.
Find the Language option and s...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT 180T
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage.
Please follow these steps:
Refer to the instructional video to refit the carriage onto the...
MTB-CUT 180T
This issue may be caused by:
The material sensor being blocked
A mainboard malfunction
Please try the following steps:
Go to Settings
Disable the “Auto Loading&rdq...
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
Steps:
Connect the Devices
It’s recommended to use Epson or Canon printer...
MTB-CUT 180T
"Solution:
Mietubl’s screen protector cutting machines come with a built-in data editing function, which allows you to modify and resize existing templates according to your requir...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is di...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT 180T
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons:
Insufficient power supply – Please verif...
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
Showing 81
to 100
of 117 results
