Showing 134 results
for
"settings button"
MTB-CUT 180T
Error 1002 indicates that a device port is occupied.
In this case, you can try the following steps:
Restart the device and go to "My" → "About This Device" to check if the Q...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.。
This video provides a step-by-step guide on...
MTB-CUT 180T
"I believe you mean you want to completely reset the device.
If you want to restore the device to factory settings,
you can follow the steps shown in the video below.
However,...
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
"The continuous running of the motor may be caused by the following reasons:
Poor motor wiring connection: Check if the motor wiring is secure. If there is any looseness or poor co...
MTB-CUT 180T
"You can reinstall the Cutter App by following these steps:
Open Browser
On the smart screen protector cutting machine, run the Chrome browser and enter the following address:
ht...
MTB-CUT 180T
This issue may be caused by a WiFi module failure in the screen assembly.
Step 1: Check whether the WiFi list can be loaded
Please open the WiFi settings page and check whether t...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts
However, this is only a recommended value.
The actual blade lifespan may increase or decre...
MTB-CUT 180T
"A slow APP startup is usually caused by excessive cached data slowing down performance. You can try the following steps:
Clear the Cache: Follow the steps shown in the video to go...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
Center Cutting is a function that positions the cutting area exactly in the center of the material.
The cutting position is calculated based on the width and height values you ent...
MTB-CUT 180T
"You can set the Cutter APP as the Home App in the system settings.
Once this is set, the machine will automatically launch the Cutter App every time it’s powered on.
https://mi...
MTB-CUT 180T
"This issue is usually caused by an incorrect language setting or an incomplete language pack download.
Please follow the steps below to resolve it:
Open Settings on your device...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is di...
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
Showing 101
to 120
of 134 results
