Showing 368 results
for
"machine not cutting"
MTB-CUT M688/M288
"White edges when applying film with the MTB-CUT M288 may be caused by the following reasons:
Firmware issue – Please ensure your firmware version is V25.0431.
https://osscdn.mi...
MTB-CUT 180T
This issue is usually caused by unstable network connection, which prevents the machine from downloading model data templates.
Please try connecting the device to another stable W...
MTB-CUT 180T
"Error 1002 indicates a serial communication error within the machine.
If you encounter this issue, please try the following steps:
Reconnect to Wi-Fi and restart the device...
MTB-CUT 180T
Please go to: “Mine” → “About this machine” and check whether the device QR code is displayed properly.
If the QR code is not displayed: it may indica...
MTB-CUT 180T
"If the film cutter is unresponsive to touch, it may be due to a malfunctioning LCD screen.
Before replacing the machine, please contact the dealer or supplier who sold you the mac...
MTB-CUT 180T
"English Version
To ensure that the machine can still operate in poor network conditions, we use a combination of offline and cloud-based data processing.
If your network is conne...
MTB-CUT 180T
Please follow the operation video to connect and set up the printer.
Important Notes
Make sure the printer and MTB-CUT 180T are connected to the same WiFi network.
Not all pri...
MTB-CUT 180T
"If you are unable to start the machine and the power switch does not light up when pressed, it is likely that the switch is malfunctioning.
This video provides a step-by-step guid...
MTB-CUT 180T
This issue usually occurs after replacing the machine’s mainboard.
Because the machine ID is originally bound to the old mainboard, installing a new mainboard requires the I...
MTB-CUT M688/M288
If the MTB-CUT M288 triggers an alarm during the installation process—especially when installing on iPhone models—please don't worry.
This happens because the silicone...
MTB-CUT M688/M288
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard.
This issue is typically caused by a loose or faulty screen-to...
MTB-CUT 180T
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
MTB-CUT 180T
Phone case stickers are usually smaller than standard back film sizes. To avoid user confusion, this size is currently not supported by the machine.
MTB-CUT 180T
"I believe you mean you want to completely reset the device.
If you want to restore the device to factory settings,
you can follow the steps shown in the video below.
However,...
MTB-CUT M688/M288
Sorry, this model does not support a mobile APP.
The machine is operated directly through its built-in system and touchscreen interface.
MTB-CUT 180T
The correct Gear Ratio settings are:
X-axis: 2000
Y-axis: 2000
Please do NOT modify the Gear Ratio settings.
Incorrect Gear Ratio values may cause the machine to malfun...
MTB-CUT 180T
"We periodically release updates for the machine's app to improve performance and functionality.
The password required to perform the app upgrade is ""1212"".
Please note:
App...
MTB-CUT 180T
"By accessing the error information interface, we can quickly determine whether the device is functioning properly.
You can send the error details to our technical team to help the...
MTB-CUT 180T
The screen protector machine’s app updates are one-way.
This means:
➡️ Once the app is updated to a higher version, it cannot be rolled back to a lower version.
Rollback o...
MTB-CUT 180T
If the device shows an error such as “Failed to query the hardware version”, please try the following steps:
1.Restart the machine and check if the message disappears....
Showing 121
to 140
of 368 results
