If you need to recharge (add cutting balance or renew your service) for the machine, please contact the local distributor who sold the device to you. Your distributor will...
Currently, our distributors in India also act as service centers. If you encounter any issues with your machine, please contact the distributor who sold you the machine directly. F...
"You can refer to the following video for instructions on replacing the motherboard. You can obtain a replacement motherboard from your local distributor or contact the dealer who...
"You can contact your local distributor who sold you the smart screen protector cutting machine and let them know you would like to order a new screen; Alternatively, click the Wha...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app. All operations — such as template selection, cutting setup, and data updates — are perf...
"If the machine displays a “connection timeout” message during startup, it typically indicates a mainboard failure. Please contact your local distributor to obtain a replacement ma...
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by: Loose or Damaged Screen Cable Op...
We not only provide the screen protector cutting machines, but also offer various types of cutting materials with different functions and sizes. You can purchase the cutting films...
If you need to fill or recharge consumables (such as credits,cutting materials, blades, etc.), please contact your local distributor or the person who originally sold the machine...
If the main holder (blade carriage holder) becomes loose and you need to press it by hand for proper cutting, this means the part is worn out or has lost stability. The cutting ho...
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction. The blade-down action is controlled by the Y-axis motor signal fro...
If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
