Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
Please keep speed at 200. The blade holder scale should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade s...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
"When the film bulges during cutting, it is usually caused by the following reasons: Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
The intelligent film cutting machine uses hydrogel screen protectors, typically made of TPU/PET material. These can include high-definition, privacy, explosion-proof, matte, and an...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully: Connect to a stable network Ensure the M288 is connected to a reliabl...
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material. Thicker or harder materials require a higher blade size, while thi...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
A Full Back template refers to a full-wrap back film that covers: The back of the phone The side edges The curved corners around the device Compared with normal back films,...
