A Full Back template refers to a full-wrap back film that covers: The back of the phone The side edges The curved corners around the device Compared with normal back films,...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page. Additionally, ensure that the material size is set to 180mm x 120mm. Since the ful...
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page. This is because full-wrap back films have larger dimensions, so you can either use...
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled. Solution When cutting full back films, please disable the &l...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
"If the cut model from the machine is inaccurate, the possible reasons include: Incorrect model selection Make sure the selected cutting model in the machine matches the actual de...
"This issue is usually caused by the template being too large. Try to disable the “Cut Center” option in the cutting page. https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
Like all our customers, we aim to include as much model data as possible. However, some models—especially full-back templates—are difficult to obtain and require time t...
"We offer multiple template variations for the same phone model to meet different user requirements. You can distinguish them by their names, which indicate their intended usage sc...
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function. Here’s how it works: When “Cut Center” is...
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T. The main differences between the two models are: Maximum cutting size Additional functions and f...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life. However, after prolonged use, the surface of the mat strip...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
