There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
The MTB-CUT 180T screen protector cutting machine supports a maximum cutting width of 228 mm, which corresponds to screen protectors up to approximately 16 inches in size. Notes:...
The MTB-CUT 180T supports a maximum cutting size of 16 inches, suitable for mobile phones, tablets, and some laptops. If a larger cutting size is required, you can choose...
The Mietubl screen protector cutting machine supports both Canon and Epson printers. Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T. The main differences between the two models are: Maximum cutting size Additional functions and f...
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position. - Step 1: Press and hold the power button for 20 seconds to restart the mac...
For the Mietubl MTB-CUT 180T screen protector cutting machine, the maximum supported cutting size is: 16 inches
What’s the difference between templates named “Case Friendly” and “Front”? Templates labeled “Case Friendly” are specially designed to be...
Yes. The MTB-CUT 180T Screen Protector Machine can cut various types of screen protector materials. The maximum supported cutting thickness is 0.7 mm, which fully covers a...
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage. During normal daily us...
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally. Common causes include a stuc...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".If your version is lower than 3.0.03, please go...
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle. Please follo...
If the machine is vibrating abnormally, please check the following two points: 1. Check the transportation screw If this is a new machine, please make sure the screw on the back...
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard. This issue is typically caused by a loose or faulty screen-to...
