Showing 59 results
for
"rear film"
MTB-CUT 180T
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
Steps:
Connect the Devices
It’s recommended to use Epson or Canon printer...
MTB-CUT 180T
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the Devices
We recommend using the following printer models...
MTB-CUT 180T
How do I put my picture in it and stick it on my phone?
Yes. To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
1. Connect the...
MTB-CUT 180T
Large-size screen protectors such as iPad and laptop films have longer cutting paths.
During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
MTB-CUT 180T
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
MTB-CUT 180T
Installing a UV screen protector is different from applying regular screen protector materials.
UV protectors require an additional curing step to harden the surface.
Steps &...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
The blade size (blade holder scale) should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade size, while thi...
MTB-CUT 180T
The intelligent film cutting machine uses hydrogel screen protectors, typically made of TPU/PET material. These can include high-definition, privacy, explosion-proof, matte, and an...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size main...
MTB-CUT 180T
"The intelligent film cutting machine is easy to set up.
The standard settings include cutting pressure, cutting speed, blade holder scale, and material size.
Material size mainl...
MTB-CUT 180T
"When the film bulges during cutting, it is usually caused by the following reasons:
Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials:
Material | Back Film | Four Layer Soft Film | Explosion-...
MTB-CUT 180T
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material.
The thicker the material, the higher the blade holder scale...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
MTB-CUT 180T
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
Showing 1
to 20
of 59 results
