Showing 56 results
for
"support"
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
"On the home page, click the “Forget password” option and enter the email address you used during registration to reset your password.
https://osscdn.mietubl.com/images/20250813172...
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and...
MTB-CUT M188
The MTB-CUT M188 TPU screen protector machine does not have a Bluetooth module, so it does not support Bluetooth connections. You can visit the following link to compare the functi...
MTB-CUT M188
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by:
Loose or Damaged Screen Cable
Op...
MTB-CUT 180T
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
MTB-CUT 180T
This issue usually occurs after replacing the machine’s mainboard.
Because the machine ID is originally bound to the old mainboard, installing a new mainboard requires the I...
MTB-CUT 180T
Large-size screen protectors such as iPad and laptop films have longer cutting paths.
During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
MTB-CUT 180T
"Sorry, the device does not currently support cut only words
This option may be considered in a future software update."
MTB-CUT 180T
At present, our smart screen protector machines do not support direct connection to a computer. All operations and data synchronization must be done through the machine’s built-in...
MTB-CUT 180T
"English Version
To ensure that the machine can still operate in poor network conditions, we use a combination of offline and cloud-based data processing.
If your network is conne...
MTB-CUT 180T
Our smart screen protector cutting machine uses a cloud-based database for data updates and currently does not support direct connection to a laptop. In the future, we may release...
MTB-CUT 180T
"You can change your password in two ways:
Change directly on the machine – Go to Home → My → Change Password, enter your current password, and set a new one.
Request technical...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
Our smart screen protector cutting machine uses a cloud-based database for data updates and currently does not support direct connection to a laptop. In the future, we may release...
MTB-CUT 180T
The smart cutting machine supports Canon series printers, and we recommend using the Canon G580 / G680 models or any Canon printer that uses the same driver.
Note: Since cutting m...
MTB-CUT 180T
To add a new model, send the full and accurate brand and model name (e.g., "Reeder S23 Pro Max," "Xiaomi Pad SE") in the support chat. If possible, include a clear picture of the d...
MTB-CUT 180T
"This issue is usually caused by an incorrect language setting or an incomplete language pack download.
Please follow the steps below to resolve it:
Open Settings on your device...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
Showing 1
to 20
of 56 results
