Showing 29 results
for
"full cover"
MTB-CUT M288
"The top cover of the M288 machine is secured with pins.
If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
MTB-CUT M188
"The top cover of the M288 machine is secured with pins.
If the top cover comes off, you can follow the method shown in the video to properly lock the top cover back in place." htt...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
A Full Back template refers to a full-wrap back film that covers:
The back of the phone
The side edges
The curved corners around the device
Compared with normal back films,...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
What’s the difference between templates named “Case Friendly” and “Front”?
Templates labeled “Case Friendly” are specially designed to be...
MTB-CUT 180T
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page.
Additionally, ensure that the material size is set to 180mm x 120mm.
Since the ful...
MTB-CUT 180T
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page.
This is because full-wrap back films have larger dimensions,
so you can either use...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
This issue is usually caused by a mismatch between the material size settings and the template being used.
When cutting full back film, the cutting area is larger than standard te...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled.
Solution
When cutting full back films, please disable the &l...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
Like all our customers, we aim to include as much model data as possible. However, some models—especially full-back templates—are difficult to obtain and require time t...
MTB-CUT 180T
"We offer multiple template variations for the same phone model to meet different user requirements.
You can distinguish them by their names, which indicate their intended usage sc...
MTB-CUT 180T
"If the cut model from the machine is inaccurate, the possible reasons include:
Incorrect model selection
Make sure the selected cutting model in the machine matches the actual de...
MTB-CUT 180T
"This issue is usually caused by the template being too large.
Try to disable the “Cut Center” option in the cutting page.
https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
Showing 1
to 20
of 29 results
