Showing 328 results
for
"screen protector cutting machine"
MTB-CUT 180T
"If the cut model from the machine is inaccurate, the possible reasons include:
Incorrect model selection
Make sure the selected cutting model in the machine matches the actual de...
MTB-CUT 180T
"The auto-loading sensor is essential for enabling the machine to automatically load cutting materials.
This sensor can be toggled on or off through the cutting interface.
If the...
MTB-CUT M288
Yes, the intelligent film cutting machine comes with Type-C, Micro USB, and Lightning ports, supporting various Android and iPhone mobile phones.
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
"The material size setting depends on the type of material you are using.
Mietubl's standard material size is 180mm (width) x 120mm (height).
You can configure your machine accord...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
If you need to add cutting credits / consumable balance, please contact your local distributor or the person who sold you the machine.
They will assist you in adding the a...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
If the main holder (blade carriage holder) becomes loose and you need to press it by hand for proper cutting, this means the part is worn out or has lost stability.
The cutting ho...
MTB-CUT 180T
"Although we, like you, hope that the machine can have all the model data,
due to various factors — such as newly released models or some niche models —
it may take some time to c...
MTB-CUT 180T
"You can set the Cutter APP as the Home App in the system settings.
Once this is set, the machine will automatically launch the Cutter App every time it’s powered on.
https://mi...
MTB-CUT 180T
The Gear Ratio controls the relationship between motor movement and the actual cutting distance. It is a key parameter that directly affects cutting accuracy and scaling.
The defa...
MTB-CUT 180T
"The Word Cutting feature is only available in version 3.0.03 and above.
You can check your current app version by going to "About This Device".
https://osscdn.mietubl.com/ima...
MTB-CUT 180T
The MTB-CUT 180T supports a maximum cutting size of 16 inches, suitable for mobile phones, tablets, and some laptops.
If a larger cutting size is required, you can choose...
MTB-CUT 180T
"In most cases, templates are designed with precise and regular shapes.
If the shapes are not forming properly, it may be caused by:
A loose cutting carriage – Please check if t...
MTB-CUT 180T
This issue is usually caused by the Blade Holder scale being set too high.
Please try to reduce the Blade Holder scale setting.
Important Note
Pay attention to the blade exposur...
MTB-CUT 180T
"Here are some default setting ：material size is 180mm width × 120mm height.
Cutting pressure: 300
Cutting speed: 200
Blade holder scale: 5
These default settings are sui...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
MTB-CUT 180T
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage.
Please follow these steps:
Refer to the instructional video to refit the carriage onto the...
MTB-CUT M188
"If the cutting Car does not stop automatically when it moves to either side and produces a loud noise, it may be due to a malfunctioning limit switch, which prevents the cutting C...
Showing 221
to 240
of 328 results
