Showing 36 results
for
"reset password"
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
MTB-CUT 180T
"The machine’s software version depends on the release of new features.
As of October 2025, the latest APP version is 3.0.05.
Tips:
You can check or update your version by foll...
MTB-CUT 180T
"We periodically release updates for the machine's app to improve performance and functionality.
The password required to perform the app upgrade is ""1212"".
Please note:
App...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
Yes. Although all Mietubl screen protector cutting machines can operate online directly, you are still required to register a user account when using the machine for the first...
MTB-CUT 180T
1. Check whether the Wi-Fi module is working
Open the Wi-Fi list page on your machine and confirm:
Whether the machine can scan and display the Wi-Fi networks around you;
Whethe...
MTB-CUT 180T
Error 1002 indicates that a device port is occupied.
In this case, you can try the following steps:
Restart the device and go to "My" → "About This Device" to check if the Q...
MTB-CUT 180T
This issue is usually caused by unstable network connection or software malfunction, which prevents the device from retrieving user data.
Please check whether the device is proper...
MTB-CUT 180T
"The settings button is only available when the device is logged in.
You can log in to your account again to find this button.
If, for some reason, you cannot log in successfull...
MTB-CUT 180T
"I believe you mean you want to completely reset the device.
If you want to restore the device to factory settings,
you can follow the steps shown in the video below.
However,...
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
This video demonstrates how to restore the machine to its factory settings.
Performing a factory reset will return the device to its original working state.
Please note: Any app...
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
Showing 21
to 36
of 36 results
