Showing 83 results
for
"pressure settings"
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
"Cutting misalignment is usually caused by:
Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
MTB-CUT 180T Pro
Please keep speed at 200.
The blade holder scale should be adjusted based on the thickness and hardness of the film material.
Thicker or harder materials require a higher blade s...
MTB-CUT 180T
The correct Gear Ratio settings are:
X-axis: 2000
Y-axis: 2000
Please do NOT modify the Gear Ratio settings.
Incorrect Gear Ratio values may cause the machine to malfun...
MTB-CUT 180T
This video demonstrates how to restore the machine to its factory settings.
Performing a factory reset will return the device to its original working state.
Please note: Any app...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.
This video provides a step-by-step guide on ho...
MTB-CUT M188
Restoring the MTB-CUT M188 screen protector cutting machine to its factory settings can resolve most software-related issues.
This video provides a step-by-step guide on how to pe...
MTB-CUT 180T
If the machine is operating slowly, it is usually because the cutting speed is set too low.
You can adjust the setting by following these steps:
Open the Settings page;
Find the...
MTB-CUT 180T
There are two ways to change the language on the machine:
1. From the login screen
You can select your preferred language directly from the language option on the login page....
MTB-CUT 180T
Yes, the screen protector machine can cut PET material. However, you may need to adjust the machine settings, and keep in mind that PET material is more likely to wear out the cutt...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is di...
MTB-CUT M188
If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below:
Step 1: Check the machine barcode
Check t...
MTB-CUT 180T
Error 1002 indicates that a device port is occupied.
In this case, you can try the following steps:
Restart the device and go to "My" → "About This Device" to check if the Q...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.。
This video provides a step-by-step guide on...
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
This issue is usually caused by a faulty motherboard controlling the carriage.
It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
MTB-CUT 180T
"I believe you mean you want to completely reset the device.
If you want to restore the device to factory settings,
you can follow the steps shown in the video below.
However,...
Showing 41
to 60
of 83 results
