When you say “wrong cutting”, we need more specific information to provide the correct solution. Please confirm whether you selected the correct phone model/template...
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons: Insufficient power supply – Please verif...
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function. Here’s how it works: When “Cut Center” is...
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions: Use X/Y Axis Mirro...
Unlike laser cutting machines, our screen protector cutting machine uses physical cutting, which is safe, noise-free, and pollution-free.
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting. Please follow these steps: Refer to the instruction video and re...
"The cutting machine may work slowly if the cutting speed setting is too low. Please try setting the cutting speed to the default value of 200 and then attempt cutting again. If...
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting. Please check the following: Ensure all rollers are positioned...
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle. Please follo...
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car. If the X-axis belt...
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
This video provides a step-by-step guide on how to replace the cutting module spring of the MTB-CUT M188 screen protector cutting machine to resolve the issue of the cutting module...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
All of our screen protector cutting machines (Including: 180T / M188 / M288 ) support the counting and statistics function. You can check the cutting and sales statistics by going...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"The intelligent film cutting machine has two belts: One is used to control the left-right movement of the carriage https://osscdn.mietubl.com/images/X-axis-belt.jpg The othe...
