If the machine displays “K_data_update_error”, it is usually because the APP data loading process was interrupted after an upgrade, resulting in incomplete data. Please try the fo...
It is usually because the APP data loading process was interrupted after an upgrade, resulting in incomplete data. Please restore the machine to factory settings, and then upgrade...
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues. This video provides a step-by-step guide on ho...
If the screen turns off automatically abnormally, it may be caused by a short circuit or internal wiring issue. Please click the WhatsApp button below and send the following to ou...
If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below: Step 1: Check the machine barcode Check t...
"If the machine is continuously beeping and not working properly, please try the following steps: Force Restart: Press and hold the power button for 20 seconds to force the machine...
"This issue can be caused by several reasons: Low Cutting Pressure Check your cutting pressure settings. If the pressure is too low, the blade holder won’t drop enough to tou...
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
"The Word Cutting feature is only available in version 3.0.03 and above. You can check your current app version by going to "About This Device". https://osscdn.mietubl.com/ima...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
As of March 2026, the latest APP version is 3.0.05. You can go to: “Mine” → “APP version update” to check and update to the latest version. If you...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
Please scan the QR code below to download the mobile app. Currently, the MTB-CUT 180T Pro only supports an Android APP. After installing the APP, tap the top-right corner on...
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".If your version is lower than 3.0.03, please go...
To connect an Epson printer, you need to update the machine APP first. Steps Go to: Mine → APP Version Update → Test Version → Enter the update password: 202...
