Showing 56 results
for
"version test password"
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
The motherboard version is determined by and tied to the hardware used in the machine.
It will not change when you update the machine’s APP or software.
Therefore,...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting.
Please follow these steps:
Refer to the instruction video and re...
MTB-CUT 180T
This issue is usually caused by the fixing screws at the back of the machine that secure the carriage during shipping not being removed.
Please check if the fixing screws at the b...
MTB-CUT 180T
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle.
Please follo...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
MTB-CUT 180T
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage.
Please follow these steps:
Refer to the instructional video to refit the carriage onto the...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
MTB-CUT 180T
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app.
All operations — such as template selection, cutting setup, and data updates — are perf...
MTB-CUT 180T
"If you experience unresponsive touch or system crashes, it may be necessary to replace the machine’s screen.
This video provides a step-by-step guide on how to replace the screen...
MTB-CUT 180T
If the machine is showing “Failed to query the hardware version of the machine”, the machine’s mainboard may be faulty.
In this case, the mainboard may...
MTB-CUT 180T
The screen protector machine’s app updates are one-way.
This means:
➡️ Once the app is updated to a higher version, it cannot be rolled back to a lower version.
Rollback o...
MTB-CUT 180T
If the device shows an error such as “Failed to query the hardware version”, please try the following steps:
1.Restart the machine and check if the message disappears....
MTB-CUT 180T
You can edit your registration information by following these steps:
Go to the “Mine” page on the machine.
From there, you can update your account information and c...
MTB-CUT 180T
The password for the software upgrade is 1212.
Please note that the software upgrade is intended for functional updates and does not necessarily include additional templates.
MTB-CUT 180T
This issue is usually caused by a faulty motherboard controlling the carriage.
It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
Showing 21
to 40
of 56 results
