This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
The intelligent film cutting machine uses hydrogel screen protectors, typically made of TPU/PET material. These can include high-definition, privacy, explosion-proof, matte, and an...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting. Please check the following: Ensure all rollers are positioned...
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
It is generally recommended to replace the blade after around 300 cuts. The actual replacement frequency may vary depending on material type and usage. If cutting quality...
"The privacy angle setting is mainly used for HD privacy cutting materials. Since screen structures and display effects vary across devices, there is no universal angle setting. Yo...
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
Using the machine is very simple. After completing the account registration, you only need to: Select the required phone model/template on the machine Place the cutting materi...
"When the film bulges during cutting, it is usually caused by the following reasons: Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
Under normal conditions, we recommend replacing the blade after approximately: 300 cuts However, this is only a recommended value. The actual blade lifespan may increase or decre...
"Uneven film widths after cutting are usually caused by incorrect wheel positioning. If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
"If the machine is continuously beeping and not working properly, please try the following steps: Force Restart: Press and hold the power button for 20 seconds to force the machine...
The Blade Holder Scale depends on the thickness of the material. For most TPU screen protector materials, the following settings are recommended: Blade Size: 5 Pressure: 300 &n...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
"This issue is usually caused by the template being too large. Try to disable the “Cut Center” option in the cutting page. https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
The Blade Holder Scale depends on the thickness of the material. For most Back Film materials, the recommended settings are: Blade Size: 4 Pressure: 300 These settings...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
The Mietubl screen protector cutting machine supports both Canon and Epson printers. Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
