The Upgrade Code is mainly used for internal testing purposes. Usually are unstable version Under normal circumstances, if you want to update your device, you only need to: C...
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully: Connect to a stable network Ensure the M288 is connected to a reliabl...
"We periodically release updates for the machine's app to improve performance and functionality. The password required to perform the app upgrade is ""1212"". Please note: App...
The password for software/firmware upgrade is: 1212
The password for the software upgrade is 1212. Please note that the software upgrade is intended for functional updates and does not necessarily include additional templates.
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
"If the 180T screen protector cutting machine displays a “Reconnection” message after startup, it is likely that there is an issue with the system firmware. You can resolve this by...
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard. This situati...
"The Word Cutting feature is only available in version 3.0.03 and above. You can check your current app version by going to "About This Device". https://osscdn.mietubl.com/ima...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device If your version is lower than 3.0.03, please go...
"The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device"".If your version is lower than 3.0.03, please go...
"You can set the Cutter App as the default startup app by following these steps: Open the device System Settings. Locate Cutter App (usually found under App Management or Defaul...
This happens because the APP version was rolled back during the factory reset. When the machine is reset, the system returns to the earliest APP version, and many new models added...
"The machine’s software version depends on the release of new features. As of October 2025, the latest APP version is 3.0.05. Tips: You can check or update your version by foll...
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
How to connect the screen protector machine to a Canon / Epson printer? Please follow these steps: Go to: “Mine” → “APP version update” → &ldquo...
This issue is usually caused by app cache or data errors, preventing the app from running properly. Please follow the instruction video to clear the app cache and data, then reope...
"You can reinstall the Cutter App by following these steps: Open Browser On the smart screen protector cutting machine, run the Chrome browser and enter the following address: ht...
