Showing 81 results
for
"cut from edge"
MTB-CUT 180T
"We offer multiple template variations for the same phone model to meet different user requirements.
You can distinguish them by their names, which indicate their intended usage sc...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
"This issue is usually caused by the template being too large.
Try to disable the “Cut Center” option in the cutting page.
https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
MTB-CUT M288
"White edges when applying film with the MTB-CUT M288 may be caused by the following reasons:
Firmware issue – Please ensure your firmware version is V25.0431.
https://osscdn.mi...
MTB-CUT 180T
"Our smart screen protector machine supports a cutting speed range of 0 ~ 500.
Recommended Default Speed: 200 (suitable for most materials and mobile phone screen protectors)
Lo...
MTB-CUT 180T
"If the cutting Car fails to stop properly when reaching the edge and produces a loud noise, it is likely due to an error in the Car’s limit positioning.
You can replace specific p...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
What’s the difference between templates named “Case Friendly” and “Front”?
Templates labeled “Case Friendly” are specially designed to be...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
MTB-CUT 180T Screen Protector Cutting Machine does not include UV curing function.
If you need to perform UV curing operations, you will need to use a separate UV curing device, s...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
MTB-CUT M188
"In the MTB-CUT M188 screen protector cutting machine, the rubber strip at the bottom of the cutting module is designed to protect the cutting blade and extend the lifespan of both...
MTB-CUT M188
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
Showing 1
to 20
of 81 results
