The Cut Centered option is used to position the cutting area exactly in the center of the material size you set. For example, if your material size is set to 180mm (width) ×...
"When cutting full-wrap back films, please disable the “Center Cut” option on the cutting page. This is because full-wrap back films have larger dimensions, so you can either use...
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
This issue usually occurs when cutting full back film templates while the “Cut Center” option is enabled. Solution When cutting full back films, please disable the &l...
"All cutting options on the smart screen protector machine are displayed by default, including camera lens protectors. You can find the lens cutting option under the specific phone...
When cutting full-screen back films, please disable the "Cut Center" option on the cutting page. Additionally, ensure that the material size is set to 180mm x 120mm. Since the ful...
"The material size setting depends on the type of material you are using. Mietubl's standard material size is 180mm (width) x 120mm (height). You can configure your machine accord...
"The continuous running of the motor may be caused by the following reasons: Poor motor wiring connection: Check if the motor wiring is secure. If there is any looseness or poor co...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
"This issue is usually caused by the template being too large. Try to disable the “Cut Center” option in the cutting page. https://mietublweb.oss-cn-hongkong.aliyuncs.com/imag...
This issue is usually caused by a mismatch between the material size settings and the template being used. When cutting full back film, the cutting area is larger than standard te...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films. Recommended Solution When cutting full back film, pl...
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material. For example, this is especially helpful when cutting back...
This issue may be related to the auto-loading function or hardware components. Please disable “Auto-loading” and try cutting any screen protector model to check whethe...
This issue is usually caused by a faulty motherboard controlling the carriage. It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
"The recommended cutting parameters for back films are: Material Size: 180mm width × 120mm height Pressure: 300 Blade Holder Scale: 5 Speed: 200 These settings are suit...
This issue may be caused by: The material sensor being blocked A mainboard malfunction Please try the following steps: Go to Settings Disable the “Auto Loading&rdq...
A Full Back template refers to a full-wrap back film that covers: The back of the phone The side edges The curved corners around the device Compared with normal back films,...
