Using the machine is very simple. After completing the account registration, you only need to: Select the required phone model/template on the machine Place the cutting materi...
The operation method for the MTB-CUT 180T Pro is the same as the MTB-CUT 180T. The main differences between the two models are: Maximum cutting size Additional functions and f...
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app. All operations — such as template selection, cutting setup, and data updates — are perf...
When the screen protector cutting machine prompts you to enter an IP address while connecting to a printer, please note that this refers to the IP address of the computer where Pri...
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer. Steps 1.Downl...
If you are using a printer brand other than Canon or Epson (such as an HP printer without Wi-Fi), you will need to install the PrinterServer software on a computer. Steps 1.Downl...
"This is often caused by static electricity due to an improper power supply. - Step 1: Ensure you are using the original power adapter that came with the machine. - Step 2: Check...
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer. Steps: Connect the Devices It’s recommended to use Epson or Canon printer...
You can find the machine’s serial number from two locations: 1. On the back of the machine There is a physical sticker on the back of the screen protector machine that cont...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
If the machine is vibrating abnormally, please check the following two points: 1. Check the transportation screw If this is a new machine, please make sure the screw on the back...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
If the machine displays “K_data_update_error”, it is usually because the APP data loading process was interrupted after an upgrade, resulting in incomplete data. Please try the fo...
Please open the machine’s WiFi list and check whether available WiFi networks can be detected normally. If the machine cannot detect or display WiFi networks, the machine’s networ...
If the machine displays “Device is Disabled” while you are using it, please first check whether the machine is connected to the internet. If the machine is already onl...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
If the machine is showing “Failed to query the hardware version of the machine”, the machine’s mainboard may be faulty. In this case, the mainboard may...
If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below: Step 1: Check the machine barcode Check t...
"First, please check the barcode on the back of your machine: For devices with a barcode format MT00XXXXXXXXXXX, the machine supports connection to Canon G580 / G680 and Epson L325...
