Showing 82 results
for
"power button"
MTB-CUT 180T
"This is often caused by static electricity due to an improper power supply.
- Step 1: Ensure you are using the original power adapter that came with the machine.
- Step 2: Check...
MTB-CUT 180T
The power adapter specifications for the MTB-CUT 180T Screen Protector Cutting Machine are:
Input: 100–240V~, 50/60Hz
Output: 24V / 2A
Please use a power adapter t...
MTB-CUT 180T
If the power switch is not working properly, the power switch needs to be replaced.
Please refer to the video below for the power switch replacement procedure.
To obtain the re...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
"If you are unable to start the machine and the power switch does not light up when pressed, it is likely that the switch is malfunctioning.
This video provides a step-by-step guid...
MTB-CUT 180T
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons:
Insufficient power supply – Please verif...
MTB-CUT M688/M288
If the machine is making a constant or continuous noise, please try a hard reset first:
Press and hold the power button for 20 seconds to reset the machine.
If the noise continue...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
If the screen fails to load properly, it may be caused by:
An abnormal power shutdown that damaged the system settings
Incorrect language configuration after an update
Corrupted...
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT M688/M288
You can unload the cutting material by quickly pressing the power button on the screen protector machine.
MTB-CUT M188
In this case, you can unload the cutting material by quickly pressing the power button on the screen protector machine.
MTB-CUT M188
Since the MTB-CUT TPU screen protector machine has no handle, you can quickly press the power button, and the material will be automatically pushed out.
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT M688/M288
If the MTB-CUT M288 triggers an alarm during the installation process—especially when installing on iPhone models—please don't worry.
This happens because the silicone...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
This port is only a reserved opening in the mold.
During mold production, manufacturers usually reserve several universal interface positions to maximize compatibility and future...
MTB-CUT 180T
"The settings button is only available when the device is logged in.
You can log in to your account again to find this button.
If, for some reason, you cannot log in successfull...
Showing 1
to 20
of 82 results
