Showing 52 results
for
"system parameters"
MTB-CUT 180T
The Mietubl screen protector cutting machine supports both Canon and Epson printers.
Among these, Canon G580 / G680 are highly recommended for best compatibility and print quality...
MTB-CUT 180T
The correct cutting parameters depend on the materials being used. Here are some recommended settings for common materials:
Material | Back Film | Four Layer Soft Film | Explosion-...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"Our smart screen protector machine comes with a custom template option. You can easily create your own template by entering just a few parameters.
Steps:
On the main interface,...
MTB-CUT 180T
"If you want to change the language, follow these steps:
Change the language inside the Cutter App
Open Cutter App.
Go to the Settings menu.
Find the Language option and s...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system.
Please follow the steps below:
Clear the APP cache
Follow the method shown in the video to clear the Cutter...
MTB-CUT 180T
This issue is usually caused by a faulty motherboard controlling the carriage.
It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
MTB-CUT 180T
"If the cutting machine stops halfway, it is usually due to incorrect material size or parameter settings. When the cutting carriage reaches the edge, it triggers the edge sensor,...
MTB-CUT 180T
"If the machine remains stuck on the logo screen after powering on and cannot proceed to the next operation, reinstalling the system may resolve the issue.
This video provides a st...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）.
Please foll...
MTB-CUT 180T
Creating a cutting template is not simple it requires special software to convert it into a file format supported by the machine. For basic screen protectors, you can use the custo...
MTB-CUT 180T
The Gear Ratio controls the relationship between motor movement and the actual cutting distance. It is a key parameter that directly affects cutting accuracy and scaling.
The defa...
MTB-CUT 180T
"The default parameters of the screen protector cutting machine — blade holder scale 5 and cutting pressure 300g — are suitable for most materials, including HD clear film.
If the...
MTB-CUT 180T
"The recommended cutting parameters for UV materials on the screen protector cutting machine are:
Blade holder scale: 6, Cutting pressure: 380.
If the machine cannot cut properl...
MTB-CUT 180T
"The recommended cutting parameters for back films are:
Material Size: 180mm width × 120mm height
Pressure: 300
Blade Holder Scale: 5
Speed: 200
These settings are suit...
MTB-CUT 180T
If you want to create a new custom template, you can use the machine’s built-in Custom Template function.
This feature allows you to manually enter:
Width
Height
Corner...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
If you mean creating a new custom template, you can use our built-in Custom Template function.
This feature allows you to enter your own width, height, corner radius, and other pa...
Showing 1
to 20
of 52 results
