Showing 38 results
for
"home position"
MTB-CUT 180T
"If you start the screen protector cutting machine but the Cutter app does not launch automatically, this may be because the device was recently reset and the Cutter app has not be...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position.
Important reminders:
After adjustm...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material.
For example, this is especially helpful when cutting back...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
MTB-CUT 180T
"If the cut model from the machine is inaccurate, the possible reasons include:
Incorrect model selection
Make sure the selected cutting model in the machine matches the actual de...
MTB-CUT 180T
If you want to improve cutting results, please follow these tips:
Check Wheel Position
Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
MTB-CUT 180T
"The rollers are primarily responsible for controlling the forward and backward movement of the material.
Please note: Pay close attention to the position of the black pads on the...
MTB-CUT M288
The screen protector machine will automatically find the middle cutting position according to the material size setting. Adjust the material size setting to change the cutting rang...
MTB-CUT M188
The screen protector machine will automatically find the middle cutting position according to the material size setting. If you need to change the cutting range, adjust the materia...
MTB-CUT 180T
No, the machine uses a blade to cut, which makes it safe, quiet, and pollution-free ideal for use in locations like shopping malls or at home.
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
Showing 1
to 20
of 38 results
