Under normal conditions, we recommend replacing the blade after approximately: 300 cuts However, this is only a recommended value. The actual blade lifespan may increase or decre...
"Uneven film widths after cutting are usually caused by incorrect wheel positioning. If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
The correct Gear Ratio settings are: X-axis: 2000 Y-axis: 2000 Please do NOT modify the Gear Ratio settings. Incorrect Gear Ratio values may cause the machine to malfun...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
"This issue is usually caused by an incorrect language setting or an incomplete language pack download. Please follow the steps below to resolve it: Open Settings on your device...
If the machine displays a “Time Out” error during film cutting, please follow the steps below: 1. Check whether the motherboard is connected On the machine, go to:...
This error is usually caused by a mainboard malfunction. To fix the issue, please follow these steps: Replace the mainboard following the instructional video. Before replacing...
This issue usually occurs for the following reasons: Your email contains special characters Some characters such as **& , / , *** are not supported by the registration system...
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
If the machine is not showing phone models, this is usually caused by an incorrect language setting or an incomplete language/data package, which prevents the system from loading t...
Since the MTB-CUT TPU screen protector machine has no handle, you can quickly press the power button, and the material will be automatically pushed out.
