Showing 88 results
for
"balance issue"
MTB-CUT 180T
"The cutting machine may work slowly if the cutting speed setting is too low.
Please try setting the cutting speed to the default value of 200 and then attempt cutting again.
If...
MTB-CUT 180T
This issue is usually caused by a faulty motherboard controlling the carriage.
It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
MTB-CUT 180T
This issue is usually caused by the rollers not gripping the material properly, allowing it to shift during cutting.
Please check the following:
Ensure all rollers are positioned...
MTB-CUT 180T
"A knocking sound from the machine can be caused by the following reasons and can be resolved as follows:
Transport screws not removed (for new machines)
New machines are shippe...
MTB-CUT 180T
Resetting the system requires screen operation. If the device does not respond to touch, the reset cannot be performed.
This issue is usually caused by a screen failure, and the s...
MTB-CUT 180T
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes.
To adjust the roller position, press dow...
MTB-CUT 180T
Please first check whether the device can display the Wi-Fi list.
If the Wi-Fi list cannot be displayed: it may indicate a Wi-Fi module issue within the screen, and the screen nee...
MTB-CUT 180T
This issue is usually caused by the fixing screws at the back of the machine that secure the carriage during shipping not being removed.
Please check if the fixing screws at the b...
MTB-CUT 180T
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials:
Recommended Default Settings
Speed: 20...
MTB-CUT 180T
This issue may be caused by a WiFi module failure in the screen assembly.
Step 1: Check whether the WiFi list can be loaded
Please open the WiFi settings page and check whether t...
MTB-CUT 180T
This issue is usually caused by the Blade Holder scale being set too high.
Please try to reduce the Blade Holder scale setting.
Important Note
Pay attention to the blade exposur...
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
If the screen protector cutting machine cannot load phone models and the cutting page appears blank, it is usually caused by a language setting issue or corrupted software data.
S...
MTB-CUT 180T
"English Version
To ensure that the machine can still operate in poor network conditions, we use a combination of offline and cloud-based data processing.
If your network is conne...
MTB-CUT 180T
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle.
Please follo...
MTB-CUT 180T
If the machine is vibrating abnormally, please check the following two points:
1. Check the transportation screw
If this is a new machine, please make sure the screw on the back...
MTB-CUT 180T
Sorry, when you say “it stopped working properly”, we need to know the exact fault condition before we can provide the correct solution.
Please:
Record a clear vide...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
Showing 41
to 60
of 88 results
