Showing 297 results
for
"machine control"
MTB-CUT 180T
"The intelligent film cutting machine has two belts:
One is used to control the left-right movement of the carriage
https://osscdn.mietubl.com/images/X-axis-belt.jpg
The othe...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app.
All operations — such as template selection, cutting setup, and data updates — are perf...
MTB-CUT 180T
"All cutting options on the smart screen protector machine are displayed by default, including camera lens protectors. You can find the lens cutting option under the specific phone...
MTB-CUT 180T
"For the MTB-CUT 180T smart screen protector cutting machine, there is currently no feature to connect with a mobile phone app. You cannot control or manage the device directly via...
MTB-CUT 180T
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is disabled, plea...
MTB-CUT 180T
If the sensor is not working, please follow these steps:
1. Check Auto-loading setting
Go to Settings and check if the “Auto-loading” option is disabled.
If it is di...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
You can find the machine’s serial number from two locations:
1. On the back of the machine
There is a physical sticker on the back of the screen protector machine that cont...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
If the machine is vibrating abnormally, please check the following two points:
1. Check the transportation screw
If this is a new machine, please make sure the screw on the back...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine displays “K_data_update_error”, it is usually because the APP data loading process was interrupted after an upgrade, resulting in incomplete data.
Please try the fo...
MTB-CUT 180T
Please open the machine’s WiFi list and check whether available WiFi networks can be detected normally.
If the machine cannot detect or display WiFi networks, the machine’s networ...
MTB-CUT M688/M288
If the machine displays “Device is Disabled” while you are using it, please first check whether the machine is connected to the internet.
If the machine is already onl...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine is showing “Failed to query the hardware version of the machine”, the machine’s mainboard may be faulty.
In this case, the mainboard may...
Showing 1
to 20
of 297 results
