Showing 170 results
for
"video tutorial"
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T Pro
To help you connect directly to your Epson printer, we have prepared a short video tutorial for you. It's very easy to follow! Please watch the video below and follow the step-by-s...
MTB-CUT 180T
"You can set the Cutter App as the default startup app by following these steps:
Open the device System Settings.
Locate Cutter App (usually found under App Management or Defaul...
MTB-CUT 180T
"To create a custom rear film, you need to connect your screen protector cutting machine to a printer.
Steps:
Connect the Devices
It’s recommended to use Epson or Canon printer...
MTB-CUT 180T
"You can set the Cutter APP as the Home App in the system settings.
Once this is set, the machine will automatically launch the Cutter App every time it’s powered on.
https://mi...
MTB-CUT 180T
"First, please check the barcode on the back of your machine:
For devices with a barcode format MT00XXXXXXXXXXX, the machine supports connection to Canon G580 / G680 and Epson L325...
MTB-CUT 180T
When you first receive the machine, you must remove the transport-locking screw located on the back of the device to prevent damage to the blade carriage.
During normal daily us...
MTB-CUT 180T
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
MTB-CUT M688/M288
The “Reconnection” message means that the screen cannot establish a proper connection with the mainboard.
This issue is typically caused by a loose or faulty screen-to...
MTB-CUT 180T
This issue is usually caused by the cutting carriage becoming loose from the guide rail. When the carriage is not firmly fixed, the blade cannot follow an accurate circular path, r...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
If the machine is vibrating abnormally, please check the following two points:
1. Check the transportation screw
If this is a new machine, please make sure the screw on the back...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system.
Please follow the steps below:
Clear the APP cache
Follow the method shown in the video to clear the Cutter...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）.
Please foll...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage.
Please follow these steps:
Refer to the instructional video to refit the carriage onto the...
MTB-CUT 180T
This issue is usually caused by unstable network connection or software malfunction, which prevents the device from retrieving user data.
Please check whether the device is proper...
MTB-CUT 180T
If the screen protector cutting machine fails to load phone models correctly, it may be caused by incorrect language settings or app data issues.
Please follow the instruction vid...
Showing 21
to 40
of 170 results
