Showing 16 results
for
"motor control"
MTB-CUT 180T
"The continuous running of the motor may be caused by the following reasons:
Poor motor wiring connection: Check if the motor wiring is secure. If there is any looseness or poor co...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
MTB-CUT 180T
"
The motor in the smart screen protector cutting machine is highly reliable and rarely requires replacement or repair. If the motor of your machine is not functioning properly, we...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
"The intelligent film cutting machine has two belts:
One is used to control the left-right movement of the carriage
https://osscdn.mietubl.com/images/X-axis-belt.jpg
The othe...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
"All cutting options on the smart screen protector machine are displayed by default, including camera lens protectors. You can find the lens cutting option under the specific phone...
MTB-CUT 180T
"For the MTB-CUT 180T smart screen protector cutting machine, there is currently no feature to connect with a mobile phone app. You cannot control or manage the device directly via...
MTB-CUT 180T
"
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and de...
MTB-CUT 180T
Sorry, the current Mietubl screen protector cutting machine does not support direct connection to a mobile app.
All operations — including model selection, data updates, and...
MTB-CUT 180T
"Currently, the MTB-CUT 180T screen protector cutting machine does not include a mobile app.
All operations — such as template selection, cutting setup, and data updates — are perf...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
"The machine is equipped with X-axis and Y-axis motors. The X-axis motor is responsible for controlling the horizontal (left-right) movement of the cutting Car.
If the X-axis belt...
MTB-CUT 180T
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction.
The blade-down action is controlled by the Y-axis motor signal fro...
Showing 1
to 16
of 16 results
Previous
Next
