If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below: Step 1: Check the machine barcode Check t...
If you encounter problems while configuring the machine, you can try using the following default settings, which work for most materials: Recommended Default Settings Speed: 20...
If the sensor is not working, please follow these steps: 1. Check Auto-loading setting Go to Settings and check if the “Auto-loading” option is disabled. If it is di...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size main...
If the machine is vibrating abnormally, please check the following two points: 1. Check the transportation screw If this is a new machine, please make sure the screw on the back...
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps: Restart the machi...
This issue may be caused by a WiFi module failure in the screen assembly. Step 1: Check whether the WiFi list can be loaded Please open the WiFi settings page and check whether t...
"If the sensor is not working, please check whether it has been disabled in the settings. Go to Settings, find the option “Material Auto-feeding”, and make sure it is turned ON....
Installing a UV screen protector is different from applying regular screen protector materials. UV protectors require an additional curing step to harden the surface. Steps &...
If you are using standard back film, please follow these steps: Set the material size in settings according to your actual material (e.g., 180 × 120 mm) Enable the &ldquo...
"The intelligent film cutting machine is easy to set up. The standard settings include cutting pressure, cutting speed, blade holder scale, and material size. Material size mainl...
"Here are some default setting ：material size is 180mm width × 120mm height. Cutting pressure: 300 Cutting speed: 200 Blade holder scale: 5 These default settings are sui...
"If you want to change the language, follow these steps: Change the language inside the Cutter App Open Cutter App. Go to the Settings menu. Find the Language option and s...
Our screen protector cutting machine provides five built-in pressure preset slots. You can rename these presets and save the pressure settings for your commonly used cutting mater...
"If the cutting process cannot start, please follow these steps to troubleshoot: Restart the machine: Power off and then restart the device. Check carriage reset: When the machi...
The Upgrade Code is mainly used for internal testing purposes. Usually are unstable version Under normal circumstances, if you want to update your device, you only need to: C...
"If the machine is continuously beeping and not working properly, please try the following steps: Force Restart: Press and hold the power button for 20 seconds to force the machine...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally. Common causes include a stuc...
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
