Showing 37 results
for
"system malfunction"
MTB-CUT 180T
"If you want to change the language, follow these steps:
Change the language inside the Cutter App
Open Cutter App.
Go to the Settings menu.
Find the Language option and s...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system.
Please follow the steps below:
Clear the APP cache
Follow the method shown in the video to clear the Cutter...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC connection.
The machine runs on an independent embedded operating system, and all templates and...
MTB-CUT 180T
"By default, the Mietubl screen protector cutting machine does not support direct PC or laptop connection.
The machine runs on an independent embedded operating system, and all tem...
MTB-CUT 180T
"If the machine remains stuck on the logo screen after powering on and cannot proceed to the next operation, reinstalling the system may resolve the issue.
This video provides a st...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
This issue is usually caused by corrupted cached data in the system（Please note that the following method only applies when the model list is not displayed at all.）.
Please foll...
MTB-CUT M188
A “Time Out” message usually means that there is a communication failure between the screen and the mainboard. This can be caused by:
Loose or Damaged Screen Cable
Op...
MTB-CUT 180T
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
MTB-CUT 180T
"Unexpected interruptions may lead to the loss of device firmware. This video provides step-by-step instructions on how to generate the firmware for your device and reinstall the s...
MTB-CUT 180T
"Communication failure with the machine is typically caused by network issues or a mainboard malfunction.
When encountering this problem, please try the following steps:
Reconne...
MTB-CUT 180T
"If the cutting process cannot start, please follow these steps to troubleshoot:
Restart the machine: Power off and then restart the device.
Check carriage reset: When the machi...
MTB-CUT 180T
"If the cutting Car fails to stop properly when reaching the edge and produces a loud noise, it is likely due to an error in the Car’s limit positioning.
You can replace specific p...
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine fails to automatically secure the screen protector or if the vacuum pump does not start, it may indicate a vacuum...
MTB-CUT M188
"If the MTB-CUT M288 intelligent film cutting and pasting machine fails to automatically secure the screen protector or if the vacuum pump does not start, it may indicate a vacuum...
MTB-CUT M288
If the MTB-CUT M288 triggers an alarm during the installation process—especially when installing on iPhone models—please don't worry.
This happens because the silicone...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
This error is usually caused by a mainboard malfunction.
To fix the issue, please follow these steps:
Replace the mainboard following the instructional video.
Before replacing...
MTB-CUT 180T
Please first confirm the specific issue you are facing:
1. If the blade holder does not go down during cutting
This is usually caused by a mainboard malfunction.
In this case, t...
MTB-CUT 180T
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction.
The blade-down action is controlled by the Y-axis motor signal fro...
Showing 1
to 20
of 37 results
