This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
"This is caused by an incorrect ""Material Size"" setting. For custom cuts, you must first define the dimensions of the film you are using (e.g., 300x200 mm). The machine uses this...
"English Version If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons: Template too large It’s re...
What’s the difference between templates named “Case Friendly” and “Front”? Templates labeled “Case Friendly” are specially designed to be...
The cutting speed does not have a major impact on most cutting tasks. In general: 👉 200 is the recommended default cutting speed. You only need to reduce the cutting speed when...
Large-size screen protectors such as iPad and laptop films have longer cutting paths. During long-distance cutting, the material may slightly shift due to the blade pressure, whic...
"When the film bulges during cutting, it is usually caused by the following reasons: Blade holder depth set too high – Excessive cutting depth can cause uneven stress on the materi...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
"The rubber cutting mat strip located beneath the blade serves to prevent blade wear and extend the blade’s service life. However, after prolonged use, the surface of the mat strip...
"If the machine is unable to cut screen protector materials properly, please first try the following steps: Replace the blade and blade holder with new ones. Set the cutting pre...
If you discover a size cutting problem during cutting, please send us the following information: The phone’s System Information page The corresponding cutting template/mode...
"Cutting misalignment is usually caused by: Center Cutting Not Enabled: Make sure the “Center Cutting” option is enabled on the cutting page so the machine automatically positions...
When you say “wrong cutting”, we need more specific information to provide the correct solution. Please confirm whether you selected the correct phone model/template...
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons: Insufficient power supply – Please verif...
Laptop screen protectors have a much longer cutting path, and during long-distance cutting, the material may experience slight deviation due to blade pressure. This can cause inacc...
If the cutting model is in the wrong direction (e.g., mirrored, upside down, or rotated incorrectly), you can adjust it using the mirror and rotation functions: Use X/Y Axis Mirro...
We not only provide the screen protector cutting machines, but also offer various types of cutting materials with different functions and sizes. You can purchase the cutting films...
Unlike laser cutting machines, our screen protector cutting machine uses physical cutting, which is safe, noise-free, and pollution-free.
In most cases, you can keep the cutting speed at the default value of 200. This setting works well for the majority of materials. When to reduce the speed You should lower the...
"The parameter settings of a screen protector cutting machine mainly depend on the physical properties of the material. The thicker the material, the higher the blade holder scale...
