Showing 90 results
for
"restart app"
MTB-CUT 180T
"We periodically release updates for the machine's app to improve performance and functionality.
The password required to perform the app upgrade is ""1212"".
Please note:
App...
MTB-CUT 180T
"This issue may be caused by the app freezing due to cache. You can try the following steps to fix it:
Follow the method shown in the video below to clear the cache.
https://o...
MTB-CUT 180T
If the machine stops working after performing an update, it is usually caused by incomplete data download during the update process.
You can try the following steps:
Clear the...
MTB-CUT 180T
If you have accidentally deleted the Cutter app, you can reinstall it using the device’s built-in browser.
Please open the Chrome browser on the device and enter the followi...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.。
This video provides a step-by-step guide on...
MTB-CUT 180T Pro
Please scan the QR code below to download the mobile app.
Currently, the MTB-CUT 180T Pro only supports an Android APP.
After installing the APP, tap the top-right corner on...
MTB-CUT 180T
You can restore the app to its original working state by performing a factory reset, which can resolve most software-related issues.
This video provides a step-by-step guide on ho...
MTB-CUT 180T
Error 1002 indicates that a device port is occupied.
In this case, you can try the following steps:
Restart the device and go to "My" → "About This Device" to check if the Q...
MTB-CUT 180T
Please go to: “Mine” → “About this machine” and check whether the device QR code is displayed properly.
If the QR code is not displayed: it may indica...
MTB-CUT 180T
"English Version
If you notice white edges when applying a screen protector using the MTB-CUT M288, the issue may be caused by the following reasons:
Template too large
It’s re...
MTB-CUT 180T
"This issue is usually caused by an incorrect language setting or an incomplete language pack download.
Please follow the steps below to resolve it:
Open Settings on your device...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT M188
If your MTB-CUT M188 displays “Time Out” after powering on, it is usually caused by an abnormal serial communication between the screen and the mainboard.
This situati...
MTB-CUT 180T
This is a network issue, meaning the current network’s DNS cannot resolve the server address.
Please try the following steps:
Switch to a different network
Connect the mac...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M688/M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
If the device shows an error such as “Failed to query the hardware version”, please try the following steps:
1.Restart the machine and check if the message disappears....
MTB-CUT 180T
"The Word Cutting feature is only available in version 3.0.03 and above.
You can check your current app version by going to "About This Device".
https://osscdn.mietubl.com/ima...
MTB-CUT 180T
The feature is only available in version 3.0.03 and above. You can check your current app version by going to ""About This Device
If your version is lower than 3.0.03, please go...
Showing 21
to 40
of 90 results
