Showing 65 results
for
"troubleshooting"
MTB-CUT 180T
"If the machine displays a ""Timeout"" error on startup and the ""Reconnect"" button is unresponsive, it usually means the screen cannot properly connect to the mainboard. Possible...
MTB-CUT 180T
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position.
- Step 1: Press and hold the power button for 20 seconds to restart the mac...
MTB-CUT 180T
"This can be caused by several issues:
- Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power.
- Blade Pressu...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
"Unexpected interruptions may lead to the loss of device firmware. This video provides step-by-step instructions on how to generate the firmware for your device and reinstall the s...
MTB-CUT 180T
"Cache is essential for ensuring the stable operation of the app. However, under certain circumstances — such as after an app update or when data models fail to load — clearing the...
MTB-CUT 180T
"If your device displays the error message “Unable to communicate with the device (13904)”, please navigate to “My” → “About” → “Check if the QR code is displayed”.
If the QR code...
MTB-CUT 180T
"Network latency is often unavoidable in cross-border communications.
To ensure stable device usage, we provide multiple alternative network routes.
In certain cases, you may enco...
MTB-CUT 180T
"The rollers are primarily responsible for controlling the forward and backward movement of the material.
Please note: Pay close attention to the position of the black pads on the...
MTB-CUT 180T
"Resetting the device can resolve most software-related issues.
You can access the reset option through the Wi-Fi list on the device.
Please note: Due to differences between devic...
MTB-CUT 180T
"If you are unable to start the machine and the power switch does not light up when pressed, it is likely that the switch is malfunctioning.
This video provides a step-by-step guid...
MTB-CUT 180T
"If the machine is unable to cut screen protector materials properly, please first try the following steps:
Replace the blade and blade holder with new ones.
Set the cutting pre...
MTB-CUT 180T
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons:
Insufficient power supply – Please verif...
MTB-CUT 180T
"If the 180T screen protector cutting machine displays a “Reconnection” message after startup, it is likely that there is an issue with the system firmware.
You can resolve this by...
MTB-CUT 180T
"By accessing the error information interface, we can quickly determine whether the device is functioning properly.
You can send the error details to our technical team to help the...
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine displays a ""Reconnection"" message at startup or if the cutting Car fails to cut properly, the mainboard may be f...
MTB-CUT M288
"The silicone pad is one of the few parts in the MTB-CUT M288 intelligent film cutting and pasting machine that requires replacement.
It is essential for the proper installation of...
MTB-CUT M288
"If the MTB-CUT M288 intelligent film cutting and pasting machine fails to automatically secure the screen protector or if the vacuum pump does not start, it may indicate a vacuum...
MTB-CUT M288
"White edges when applying film with the MTB-CUT M288 may be caused by the following reasons:
Firmware issue – Please ensure your firmware version is V25.0431.
https://osscdn.mi...
Showing 21
to 40
of 65 results
