If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
"This can be caused by several issues: - Incorrect Power Supply: Ensure you are using the original power adapter. An incorrect adapter can cause insufficient power. - Blade Pressu...
"This is often caused by static electricity due to an improper power supply. - Step 1: Ensure you are using the original power adapter that came with the machine. - Step 2: Check...
"If the Car moves after you initiate cutting, but the blade holder does not drop, this issue may be caused by one of the following reasons: Insufficient power supply – Please verif...
This error is usually caused by a mainboard malfunction. To fix the issue, please follow these steps: Replace the mainboard following the instructional video. Before replacing...
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
"If you are unable to start the machine and the power switch does not light up when pressed, it is likely that the switch is malfunctioning. This video provides a step-by-step guid...
Our screen protector machine offers several advantages: 1. No cutting limit no need to pay for each cut. 2. Double motors for stronger cutting power. 3. Adjustable cutting pressure...
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps: Restart the machi...
"If the cutting process cannot start, please follow these steps to troubleshoot: Restart the machine: Power off and then restart the device. Check carriage reset: When the machi...
"If the machine is continuously beeping and not working properly, please try the following steps: Force Restart: Press and hold the power button for 20 seconds to force the machine...
"This error usually means the cutting carriage (X-axis motor) is stuck or cannot find its home position. - Step 1: Press and hold the power button for 20 seconds to restart the mac...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
You can unload the cutting material by quickly pressing the power button on the screen protector machine.
"The MTB-CUT M288 uses an integrated clip-on screen design. If you need to replace the screen, simply use a tool to release the clips and connect the new screen to the power cable....
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully: Connect to a stable network Ensure the M288 is connected to a reliabl...
In this case, you can unload the cutting material by quickly pressing the power button on the screen protector machine.
Since the MTB-CUT TPU screen protector machine has no handle, you can quickly press the power button, and the material will be automatically pushed out.
There are three possible causes for this error: 1. The template width exceeds the maximum supported size The maximum cutting width of the screen protector machine is 228 mm. If...
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally. Common causes include a stuc...
