Showing 109 results
for
"test cut"
MTB-CUT 180T
"The version test password feature is intended only for limited testing before a new version is officially released.
It does not always take effect, and the default password is usu...
MTB-CUT 180T
To connect an Epson printer, you need to update the machine APP first.
Steps
Go to:
Mine → APP Version Update → Test Version → Enter the update password: 202...
MTB-CUT M288
"To update the firmware on the M288 for fixing issues like UV film white edges, follow these steps carefully:
Connect to a stable network
Ensure the M288 is connected to a reliabl...
MTB-CUT 180T
If the circle cut is not perfect, the issue is usually caused by a loose cutting carriage, which makes the cutting path unstable and results in an imperfect circle.
Please follo...
MTB-CUT 180T
"Uneven film widths after cutting are usually caused by incorrect wheel positioning.
If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
MTB-CUT 180T
This issue is usually caused by a loose carriage, resulting in unstable cutting paths and improper round cutting.
Please follow these steps:
Refer to the instruction video and re...
MTB-CUT 180T
How to connect the screen protector machine to a Canon / Epson printer?
Please follow these steps:
Go to: “Mine” → “APP version update” → &ldquo...
MTB-CUT 180T
This issue is usually caused by the fixing screws at the back of the machine that secure the carriage during shipping not being removed.
Please check if the fixing screws at the b...
MTB-CUT 180T
If the camera lens cutout appears oval-shaped, it is likely caused by a loose carriage.
Please follow these steps:
Refer to the instructional video to refit the carriage onto the...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
"This issue can be caused by several reasons:
Low Cutting Pressure
Check your cutting pressure settings.
If the pressure is too low, the blade holder won’t drop enough to tou...
MTB-CUT 180T
According to your description, this issue is usually caused by a short circuit on the motherboard or a motherboard failure. When the motherboard fails to complete the self-test, th...
MTB-CUT 180T
The Cut Centered option is used to position the cutting area exactly in the center of the material size you set.
For example, if your material size is set to 180mm (width) ×...
MTB-CUT 180T
You can adjust the cutting location by modifying the Material Size and enabling or disabling the Cut Center function.
Here’s how it works:
When “Cut Center” is...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
This issue usually occurs when the material size settings do not match the template, especially when cutting full back films.
Recommended Solution
When cutting full back film, pl...
MTB-CUT 180T
MTB-CUT 180T Screen Protector Cutting Machine does not include UV curing function.
If you need to perform UV curing operations, you will need to use a separate UV curing device, s...
MTB-CUT 180T
The Cut Centered option is useful when you want the cutting area to be positioned exactly in the center of your material.
For example, this is especially helpful when cutting back...
MTB-CUT 180T
The MTB-CUT 180T supports a maximum cutting size of 16 inches, suitable for mobile phones, tablets, and some laptops.
If a larger cutting size is required, you can choose...
MTB-CUT 180T
"When cutting back films, you need to consider both the pattern position and the cutting range. You can adjust these by setting the material size and enabling or disabling center c...
Showing 1
to 20
of 109 results
