If the sensor is not working, please follow these steps: 1. Check Auto-loading setting Go to Settings and check if the “Auto-loading” option is disabled. If it is di...
"If the tablet screen protector is not cutting well, it is usually because the roller is not providing enough pressure. You can try the following solutions: Lift the gear at the ba...
"The roller in the MTB-CUT M188 screen protector cutting machine is primarily responsible for controlling the forward and backward movement of the cutting material. If the cutting...
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
This issue is usually caused by incorrect roller positioning, resulting in uneven pressure on the material and inconsistent cutting sizes. To adjust the roller position, press dow...
"The following is a video of replacing the roller of the MTB-CUT 180T intelligent film cutting machine. https://osscdn.mietubl.com/video/202508132101.mp4"
"The rollers are primarily responsible for controlling the forward and backward movement of the material. Please note: Pay close attention to the position of the black pads on the...
To adjust the roller position, press down the handle at the back of the machine, then move the rollers left or right to the correct position. Important reminders: After adjustm...
This issue is usually caused by a faulty motherboard controlling the carriage. It is recommended to contact your local distributor to obtain a replacement motherboard. Please refe...
" The motor in the smart screen protector cutting machine is highly reliable and rarely requires replacement or repair. If the motor of your machine is not functioning properly, we...
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches: Replace the Sensor If the senso...
If the blade does not drop properly during cutting, this issue is most likely caused by a mainboard malfunction. The blade-down action is controlled by the Y-axis motor signal fro...
If your touch screen is not responding properly, please check the following: 1. Confirm you are using the original power adapter The original adapter should be 24V / 2.7A. Usi...
"In most cases, templates are designed with precise and regular shapes. If the shapes are not forming properly, it may be caused by: A loose cutting carriage – Please check if t...
"Uneven film widths after cutting are usually caused by incorrect wheel positioning. If the wheels are pressing on the smooth part, they cannot firmly hold the film, leading to inc...
If you want to improve cutting results, please follow these tips: Check Wheel Position Make sure all pinch wheels firmly press on the cutting material, and their position is on t...
Resetting the system requires screen operation. If the device does not respond to touch, the reset cannot be performed. This issue is usually caused by a screen failure, and the s...
Currently, our distributors in India also act as service centers. If you encounter any issues with your machine, please contact the distributor who sold you the machine directly. F...
Please first check whether the device can display the Wi-Fi list. If the Wi-Fi list cannot be displayed: it may indicate a Wi-Fi module issue within the screen, and the screen nee...
It is generally recommended to replace the blade after around 300 cuts. The actual replacement frequency may vary depending on material type and usage. If cutting quality...
