Showing 262 results
for
"machine housing"
MTB-CUT 180T
"The machine features an independent housing design.
In the event of housing damage, you can replace the machine’s outer shell separately without needing to replace the entire unit...
MTB-CUT 180T
You can find the machine’s serial number from two locations:
1. On the back of the machine
There is a physical sticker on the back of the screen protector machine that cont...
MTB-CUT 180T
If the machine displays a “Time Out” error during film cutting, please follow the steps below:
1. Check whether the motherboard is connected
On the machine, go to:...
MTB-CUT 180T
If the machine is vibrating abnormally, please check the following two points:
1. Check the transportation screw
If this is a new machine, please make sure the screw on the back...
MTB-CUT 180T
"When the sensor malfunctions, the machine may fail to detect or automatically load the cutting material. You can try the following two approaches:
Replace the Sensor
If the senso...
MTB-CUT 180T
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M288
There are three possible causes for this error:
1. The template width exceeds the maximum supported size
The maximum cutting width of the screen protector machine is 228 mm.
If...
MTB-CUT M188
If your MTB-CUT M188 displays a “Time Out” or “Reconnection” error after startup, please follow the steps below:
Step 1: Check the machine barcode
Check t...
MTB-CUT 180T
"First, please check the barcode on the back of your machine:
For devices with a barcode format MT00XXXXXXXXXXX, the machine supports connection to Canon G580 / G680 and Epson L325...
MTB-CUT 180T
"A knocking sound from the machine can be caused by the following reasons and can be resolved as follows:
Transport screws not removed (for new machines)
New machines are shippe...
MTB-CUT 180T
"If your machine stays in the “Status Checking” state for a long time, it may be caused by network delays or communication errors. Please try the following steps:
Restart the machi...
MTB-CUT 180T
Using the machine is very simple.
After completing the account registration, you only need to:
Select the required phone model/template on the machine
Place the cutting materi...
MTB-CUT 180T Pro
The MTB-CUT 180TPro screen protector cutting machine supports:
Canon printers
Epson printers
When connecting the printer, please make sure:
The printer and the screen prote...
MTB-CUT 180T
"If the machine is continuously beeping and not working properly, please try the following steps:
Force Restart: Press and hold the power button for 20 seconds to force the machine...
MTB-CUT 180T
"On the home page, click the “Forget password” option and enter the email address you used during registration to reset your password.
https://osscdn.mietubl.com/images/20250813172...
MTB-CUT M188
Sorry, the cutting machine does not have an app for Android or iOS. The reason is that you need to manually place the cutting material on the machine, and using an app to operate t...
MTB-CUT 180T
Yes. Although all Mietubl screen protector cutting machines can operate online directly, you are still required to register a user account when using the machine for the first...
MTB-CUT 180T
1. Check whether the Wi-Fi module is working
Open the Wi-Fi list page on your machine and confirm:
Whether the machine can scan and display the Wi-Fi networks around you;
Whethe...
MTB-CUT 180T
If the machine stops working after performing an update, it is usually caused by incomplete data download during the update process.
You can try the following steps:
Clear the...
MTB-CUT 180T
When the machine beeps with a repeated “bip bip” sound and fails to start cutting, it usually means that the X-axis or Y-axis cannot operate normally.
Common causes include a stuc...
Showing 1
to 20
of 262 results
